Joined
·
5,516 Posts
Post your P-11 pics
1 - 20 of 30 Posts
G
Guest
·Keys,
I contacted Jack about doing the same thing to mine. Do you notice any difference after having it done other than it looks good? Are those night sights? I have always been a fan of the two tone look. I am sorry to say that since I bought my P11, I have shot it but have not carried it yet.
I contacted Jack about doing the same thing to mine. Do you notice any difference after having it done other than it looks good? Are those night sights? I have always been a fan of the two tone look. I am sorry to say that since I bought my P11, I have shot it but have not carried it yet.
Joined
·
5,516 Posts
Jack's plated slide fit perfectly, and worked flawlessly on my P-11 when I got it back. Those are factory sights. My assembly pin and slide lock are both hard chromed, so they don't match the nickel, but they do match my hard chromed P-40 conversion top end. I recommend Jack's work, and be sure to send a mag in for plating too.
The Kel-Tec hard chrome exchange is a bargain for $20.00, but it's not as evenly finished when you get it back. See my P-40 pic on the P-40 forum. I have an original P-40, and the P-40 conversion for my P-11, both in hard chrome.
Regards, Keys 8)
The Kel-Tec hard chrome exchange is a bargain for $20.00, but it's not as evenly finished when you get it back. See my P-40 pic on the P-40 forum. I have an original P-40, and the P-40 conversion for my P-11, both in hard chrome.
Regards, Keys 8)
Joined
·
1,327 Posts
P11 pic
Keys, your P11 is real pretty.
Here's my grandson firing the P11 at the range last summer. He called it "granpa's James Bond gun". He's a big kid for 11 yrs old and had no problem staying in the black with the little 9mm. Better than me even. Gonna put him on the 1911 next summer.
og
Keys, your P11 is real pretty.
Here's my grandson firing the P11 at the range last summer. He called it "granpa's James Bond gun". He's a big kid for 11 yrs old and had no problem staying in the black with the little 9mm. Better than me even. Gonna put him on the 1911 next summer.
og
Joined
·
5,516 Posts
Flyer,
I've seen every custom job possible on a P-11, and to the best of my knowledge that is not a P-11 pic that you posted.
I think you're confusing your sidearm piece with your Saturday night........oh forget it.
Regards, Keys 8)
I've seen every custom job possible on a P-11, and to the best of my knowledge that is not a P-11 pic that you posted.
I think you're confusing your sidearm piece with your Saturday night........oh forget it.
Regards, Keys 8)
Joined
·
1,806 Posts
My bedroom night stand P-11
My first KT, purchased way back in 1995.
This P-11 (serial #132xx) complete with the KTmagazine mounted Surfire 6P flashlight is always on "stand by" with Cor-bon ammo in my bedroom...
My first KT, purchased way back in 1995.
This P-11 (serial #132xx) complete with the KTmagazine mounted Surfire 6P flashlight is always on "stand by" with Cor-bon ammo in my bedroom...
Joined
·
13 Posts
You know K/Bear, I would have to agree with you. I dont see a P11 in the pic...but I wouldnt boycott the pic. Id have to agree...Id spend more time at my local range with RO's like that........just my usual self coming through.....
Shoot well.........
Shoot well.........
Joined
·
1,327 Posts
Flyer's P11 picture
Keys,
don't you see the P11 she is wearing on that new "around the neck" holster? Look close right at the end of the "holster" at the bottom edge of the picture!
BTW, Flyer, those are the standard wooden benches you get with a free, non-competition range. The really fancy ranges have solid concrete benches so the rimfire rifle guys' rifles will not have even the slightest wiggle or vibration from the bench. Our benches are about 7 yrs old now and getting a little weather beaten. The government put the covers over them last spring. (Taxpayers expense, thank you all for paying your taxes. ) We have no regular, on duty range officer, which maybe is scary too when you see some of the types out there.
og
Keys,
don't you see the P11 she is wearing on that new "around the neck" holster? Look close right at the end of the "holster" at the bottom edge of the picture!
BTW, Flyer, those are the standard wooden benches you get with a free, non-competition range. The really fancy ranges have solid concrete benches so the rimfire rifle guys' rifles will not have even the slightest wiggle or vibration from the bench. Our benches are about 7 yrs old now and getting a little weather beaten. The government put the covers over them last spring. (Taxpayers expense, thank you all for paying your taxes.
) We have no regular, on duty range officer, which maybe is scary too when you see some of the types out there.og
G
Guest
·doomzilla9
is that a stainless steel magazine in your P11. If so where did u get that, I have to have one?
is that a stainless steel magazine in your P11. If so where did u get that, I have to have one?
nickled mag
That's a nickled mag. I had the gun fluff and buffed and nickle finished by Jack Fuselier. I can definitely recommend it. 1 mag is included in the job and additional mags can be done for a modest fee. When I get my camera back tomorrow I will post a pick of just the mag. Jack's website is:
http://www.gunsmith.fuselier.com/
and his KTOGer offer, which I would assume applies here as well:
http://www.gunsmith.fuselier.com/slideoffer.html
Last I heard from him two weeks ago he was taking new business.
That's a nickled mag. I had the gun fluff and buffed and nickle finished by Jack Fuselier. I can definitely recommend it. 1 mag is included in the job and additional mags can be done for a modest fee. When I get my camera back tomorrow I will post a pick of just the mag. Jack's website is:
http://www.gunsmith.fuselier.com/
and his KTOGer offer, which I would assume applies here as well:
http://www.gunsmith.fuselier.com/slideoffer.html
Last I heard from him two weeks ago he was taking new business.
Joined
·
5 Posts
Sorry. No bells or whistles here. Just the plain blued P-11 right out of the box but figured I'd add to the pic list. It's my daily carry but I just bought a Springfield Armory XD-9 Sub-compact that I'll be rotating in now.
Joined
·
1,616 Posts
Sorry bout the Pic, but my camera is of the not so high class type :?
G
Guest
·gun_Nut
What kind of Smith is that. 5946 DAO here...
Looks like a 2nd Generation 659????
What kind of Smith is that. 5946 DAO here...
Looks like a 2nd Generation 659????
Joined
·
1,616 Posts
Re:
BTW if any one can ID that Flash light I would be impressed. Hint it is a rechargeable flash light. Not just batteries, but actually a rechargeable flash light. I made the mount because I could never find one of the KT flash light mounts in my area.
Close! It is a 1st Gen 59 that I installed a belt clip device on. No holster needed. I do have a Kydex holster that I modified to accept the gun with Hip Grip installed. It is also wearing a Hogue Handall.norfdet893 said:gun_Nut
What kind of Smith is that. 5946 DAO here...
Looks like a 2nd Generation 659????
BTW if any one can ID that Flash light I would be impressed. Hint it is a rechargeable flash light. Not just batteries, but actually a rechargeable flash light. I made the mount because I could never find one of the KT flash light mounts in my area.
1 - 20 of 30 Posts
