Kel-Tec Forum banner
1 - 2 of 2 Posts

· Registered
3 Posts
Discussion Starter · #1 ·
There is no need to completely rack the slide back on either pistol to disassemble or reassemble. With the magazine removed and the chamber checked empty, hold the pistol in the palm of your hand. Use your thumb on the muzzle to press the slide back about a quarter of an inch. The assembly pin can now be removed or installed easily with your other hand.
Dave a
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.