Kel-Tec Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
14 Posts
Discussion Starter · #1 ·
I am ure others may have done this. I took a 13/64" Drill bit and drilled out my Gen2 rear sight. The peep sight is wider and provides a greater view of the target and is much easier for me to acquire the sight. If you play IDPA PCC Division and want to just use the irons I recomend you consider this mod. It certainly works for me.

Take Care

Bob
 

·
Registered
Joined
·
5 Posts
Put on the MCARBO rear sight upgrade. Solves the height and aperture problem. I tried drilling out the original and that worked, but the height was still an issue. Great gun.
 
1 - 2 of 2 Posts
Top