Kel-Tec Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
81 Posts
Or, screw the felt tip on, turn your Dremel on low speed and let the tip spin around in the polishing cup for a few seconds. It will leave a nice coating of polish and away you go. It also tends to spray a little polish in the air so be careful. Go outside or somewhere where you wife won't go bonkers. Also recommend strongly wearing eye protection when doing this.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top