Kel-Tec Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
394 Posts
I had the same problem. "yz's" pin modification worked for me. Perhaps someone more computer savy than I can post a link or tell you where to go for info. It's a simple and quite ingeneous solution.
Good luck.
 

·
Registered
Joined
·
109 Posts
Discussion Starter · #5 ·
It went back to the womb.

I sent it back to Kel-Tec to be fixed, Saturday.
I'm not a gunsmith, so, I'm not gunna mess with it!!
I have other things like the PPK/S or Pistolet Makarova that I can carry in the mean time. It's just that during the Arizona monsoon, my hips get to bothering me more than usual, and I wanted something very light to carry. Now, by the time it gets back to me, the "rainy season" will be over!!
 

·
Registered
Joined
·
32 Posts
New Assembly Pin

I just received a replacement assembly pin from Kel-Tec. The only difference I can find is the smaller diameter is now 0.120" vs 0.130". This isn't much difference so if this new pin backs out I'll be doing a "yz's" pin modification as well.
 
1 - 6 of 6 Posts
Top