Sub 2000 gen 2 bolt face
Results 1 to 3 of 3

Thread: Sub 2000 gen 2 bolt face

  1. #1
    Junior KTranger
    Join Date
    May 2017
    Posts
    1

    Sub 2000 gen 2 bolt face

    Ok i hope this is a easy question i bought a sub 2000 yesterday took it field striped it cleaned it and ran 75 rounds threw it. Field stripped it again little dirty not to bad cleaned it put it back together and while i was looking everything over i noticed a scratch on the bolt face the starts just under the firing pin and goes diagonal down to the left all the way to the edge i don't know if that's from having to slide over something during reassembly or if there is something else going on.
    Attached Thumbnails Attached Thumbnails Sub 2000 gen 2 bolt face-20170529_235526.jpg  
    Last edited by crostiger; 05-29-2017 at 11:12 PM.

  2. #2
    Junior KTranger
    Join Date
    Jan 2016
    Location
    NE TN (almost VA/NC)
    Posts
    12
    Does not look like a scratch, more like a milling mark. IMHO, I would not worry about it.
    Yol Bolsun (May there be a road)
    SUB-2K9-GLK19

  3. #3
    KTRangePro Haugrdr's Avatar
    Join Date
    Jul 2009
    Location
    Daytona Beach
    Posts
    418
    Quote Originally Posted by YolBolsun View Post
    Does not look like a scratch, more like a milling mark. IMHO, I would not worry about it.
    Same thought, looks like a milling mark.
    Rick
    Occupation: Retired
    Lifestyle: Biker


Sponsored links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. New owner of a Sub 2000 Gen 1.
    By Leadsled in forum SUB Carbines
    Replies: 0
    Last Post: 10-06-2016, 02:25 AM
  2. Sub 2000 gen 2, trigger problem
    By Retsof26 in forum SUB Carbines
    Replies: 1
    Last Post: 09-01-2016, 10:46 AM
  3. Sub 2000 Gen 2 S&W 9mm
    By legelegel in forum SUB Carbines
    Replies: 1
    Last Post: 02-21-2016, 05:37 AM
  4. Sub 2000 Gen 2 in S&W 59 mag
    By Arcsound in forum SUB Carbines
    Replies: 1
    Last Post: 10-09-2015, 10:53 PM