Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 28

Thread: different options for the stock on su rifles?

  1. #1
    Junior KTranger
    Join Date
    Jul 2009
    Posts
    16

    different options for the stock on su rifles?

    First and foremost I was looking for a su 16c, but apparently it is easier to find the gold at the end of the rainbow then to find one of these badboys. Anyway, I was wondering what my options were if I was to purchase another su 16 model, as far as having something like an M4 stock or something similar put on there to make them smaller, and more maneuverable like the C model.

    Thank you in advance

  2. #2
    Administrator mr surveyor's Avatar
    Join Date
    Jul 2005
    Location
    in the wind
    Posts
    4,725
    you haven't told us what part of the country you're in...it may be possible that some other forum member might be able to help you find a dealer with an SU-16.

    and, Welcome Aboard!

    surv
    *************************
    ???

  3. #3
    Junior KTranger
    Join Date
    Jul 2009
    Posts
    16
    Sorry I thought it was in my profile and it would show up on the left Lol, I am in weston fl, its right by ft lauderdale

  4. #4
    Administrator mr surveyor's Avatar
    Join Date
    Jul 2005
    Location
    in the wind
    Posts
    4,725
    that's great... we have several members from the area that may be able to help you find a shop with an SU. At the Longview, Tx gun show today I didn't see any SU's, but did see a couple of Sub2000's in .40 cal, both marked under $350. Also say quite a few P3AT's on various tables... they haven't been around much here lately, so it looks like supplies are finally beginning to keep up with demand again.

    surv
    *************************
    ???

  5. #5
    KTrange Contributor Barksdale123's Avatar
    Join Date
    Apr 2009
    Location
    Loxahatchee, Florida
    Posts
    1,472
    Drinks, last gun show up hear in Palm Beach had some SUs for $ 400 40 cal and I saw three P3ats asking was $315. There was also an SU16C I think they wanted $ 650 - $ 700 for it. There was a dealer at the show calls himself Crazy Eddie, says he can get anything.
    I'll look for his card and PM you the information if you don't think you'll mind the drive.
    All men having power ought to be distrusted to a certain degree.
    James Madison
    How strangely will the Tools of a Tyrant pervert the plain Meaning of Words!
    - Samuel Adams

  6. #6
    Administrator mr surveyor's Avatar
    Join Date
    Jul 2005
    Location
    in the wind
    Posts
    4,725
    service with a smile
    *************************
    ???

  7. #7
    Junior KTranger
    Join Date
    Jul 2009
    Posts
    16

    Re:

    Quote Originally Posted by Barksdale123
    Drinks, last gun show up hear in Palm Beach had some SUs for $ 400 40 cal and I saw three P3ats asking was $315. There was also an SU16C I think they wanted $ 650 - $ 700 for it. There was a dealer at the show calls himself Crazy Eddie, says he can get anything.
    I'll look for his card and PM you the information if you don't think you'll mind the drive.
    Sweet thank you very much... I would definitely make that drive without question, I have called pretty much every place that I could find all over the country and they haven't had one.

  8. #8
    KTrange Contributor Barksdale123's Avatar
    Join Date
    Apr 2009
    Location
    Loxahatchee, Florida
    Posts
    1,472
    Next show is August 8. There is a turnpike exit on Southern Blvd. where the fairs grounds are. Probably quicker than going to the Fort Lauderdale show since that is east west travel.
    All men having power ought to be distrusted to a certain degree.
    James Madison
    How strangely will the Tools of a Tyrant pervert the plain Meaning of Words!
    - Samuel Adams

  9. #9
    Junior KTranger
    Join Date
    Jul 2009
    Posts
    16
    thanks man, I will be there... I am still curious though as to what options there are for different stocks on the su 16 rifles just in case I cant find a C model at this show, anyone have any ideas?

  10. #10
    KTrange Contributor
    Join Date
    May 2005
    Posts
    6,323
    You can get the AR-15 style kit. It is basically a PLR-16 pistol grip with an adapter tube that allows you to mount any AR carbine stock (i.e. a buffer tube without the buffer inside).

    KT recently came out with a similar side-folder as well, IIRC.
    Former Member May 2005 - April 2011

Page 1 of 3 1 2 3 LastLast

Ads

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. P-11 grip/finish options (lots of pics)
    By pocketgun in forum P-11
    Replies: 13
    Last Post: 04-15-2013, 05:25 PM
  2. PF-9 grip/finish options (lots of pics)
    By pocketgun in forum PF-9
    Replies: 12
    Last Post: 03-26-2013, 01:43 PM
  3. Replies: 12
    Last Post: 04-10-2012, 01:35 AM
  4. Options for Re-Finishing My Slide?
    By GConn in forum PF-9
    Replies: 26
    Last Post: 02-01-2011, 03:27 PM
  5. New Sight Options for the P-11
    By carolinaman in forum P-11
    Replies: 2
    Last Post: 06-23-2005, 10:47 PM

Search tags for this page

kel tec pistol grip ar stock adapter w/ collapsible stock
,
kel tec su 16 pistol grip kit
,

kel tec su-22 ar stock adapter

,
kel-tec su-22 ar stock
,
slide stock for kel tec su16
,
stock adapters for keltec su16c
,

stock kit for plr 16

,
su 16 stock options
,
su 16c stock options
,
su-16c collapsible stock
,
su-16c stock options
,
su16 stock options
,
who makes ar 15style sights for keltec sub 2000