Cleaning SU-16.

[lost]

I have just purchased a SU-16 and upon field stripping it, I noticed that there is no way to get a stiff cleaning rod in from the breach end. I hate to push anything down from the muzzle end.

Using a flexi (string type) and pulling it from the muzzle end prevents one from using a "jaggie" type plug to hold a patch.

How do you folks clean the SU-16??

Thanks...
Lost.

[rcmodel]

The Otis cleaning system seems to have a large following in the High Speed - Low Drag crowd. The cleaning rod is flexable but stiff, like an old-time speedometer cable. Goes around corners, but stiff enough to push brushes, jags, etc.
Not cheap, but very very good!

http://www.otisgun.com/cgistore/stor...tup=1&cart_id=


rcmodel

[lost]

Thanks for the pointer. Very good site. Learned a lot. I am in Tampa at the moment so tomorrow I will check some of the stores and see if I can find something suitable.

Thanks again.

lost.