Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11

Thread: RFB preorder at impactguns.com

  1. #1
    Junior KTranger gossipninja's Avatar
    Join Date
    Dec 2006
    Posts
    17

    RFB preorder at impactguns.com


  2. #2
    Junior KTranger joker's Avatar
    Join Date
    May 2008
    Posts
    6

    how long is the wait?

    First off i am wowed buy this firearm, and love the design. Owner of my local store where i got my sub 2k9 said a long wait after your pre order is most likely, so i am apprehensive to lay down the cash. could it be just that there will only be a limited amount of these to be made and only the pre-orders will get them?

  3. #3
    KTrange Contributor
    Join Date
    May 2005
    Posts
    6,323
    Maybe your LGS will do a pre-order without the cash down? If he thinks he can sell it to someone else if you change your mind, he may agree.

    I was able to handle three different configurations of the RFB at the 2008 SHOT show, and have to say the solidness and overall quality is impressive. I would put it on par with the FN FS2000 just off the top of my head. The trigger on the RFB is by far the best I have tried on a Kel-Tec.
    Former Member May 2005 - April 2011

  4. #4
    KTrange Contributor
    Join Date
    Jul 2008
    Location
    Locust Grove, Va.
    Posts
    1,462
    Im still very "CORN"fused about forward ejection Is it pure gas pressure from the shell Fired? or a spring?? Just wondering guys
    damn this snow is cold.

  5. #5
    KTrange Contributor
    Join Date
    May 2005
    Posts
    6,323
    Unfortunately, I was not able to fire it or see it in action at SHOT - just play with it. I think gravity and the design of the internals, but can't say for sure.
    Former Member May 2005 - April 2011

  6. #6
    KTrange Contributor
    Join Date
    Jul 2008
    Location
    Locust Grove, Va.
    Posts
    1,462
    Forward ejection system includes dual extractors / ejectors, pivotally attached at either side of the bolt. Upon final stage of the bolt opening movement, those extractors are cammed up, to bring the fired cartridge above the barrel and in line with ejection chute above it. Upon closing movement of the bolt, it strips the fresh cartridge from magazine and feeds it into the chamber, simultaneously pushing the fired case forward and into ejection chute. Upon final closing movement of the bolt ejectors are cammed down to release fired case and to grip on the base of the fresh cartridge in the chamber. Fired cases then remain in the ejection chute until manually shaken out of it or pushed out by subsequent cases. Special provisions are made to avoid empty cases bounced back from chute and into receiver.

    Sorry guys but here is the answer i wanted But honestly i think its a shitty idea that you have to shake them out And i dont want to bother you with all the "what ifs" but imagine the crap that can go down if you get a shel stuck ERRRRR i really wanted this to be cool

    (put the quote tags on for ya -pg)
    damn this snow is cold.

  7. #7
    KTrange Contributor
    Join Date
    May 2005
    Posts
    6,323
    Dillypwacker, they have spent a great deal of time and money in development on the RFB. If it weren't as reliable as other systems, they wouldn't sell it. Wait and see when it hits the shelves, but don't cross it off the list yet.
    Former Member May 2005 - April 2011

  8. #8
    KTrange Contributor
    Join Date
    Jul 2008
    Location
    Locust Grove, Va.
    Posts
    1,462
    oh no im not crossing it off my list or implying that everyone shouldnt get one The forward ejection just confuses me is all I think its a great idea will be in my arsenal once i find out how it works
    damn this snow is cold.

  9. #9
    KTrange Contributor
    Join Date
    May 2005
    Posts
    6,323
    The ones I handled really seemed to be very well made. I want one.
    Former Member May 2005 - April 2011

  10. #10
    KTrange Contributor
    Join Date
    Jul 2008
    Location
    Locust Grove, Va.
    Posts
    1,462
    I cant wait to "play" with one maybe even see one in action that will be a good day
    damn this snow is cold.

Page 1 of 2 1 2 LastLast

Ads

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Search tags for this page

impact firearms rfb
,
impact guns kel tec rfb
,

impact guns rfb

,
impact gunsrfb .308
,

impactguns.com

,
kel tec rfb impact
,
kel tec rfb pre order
,
kel tec rfb st louis
,

order rfb rifle

,
pre order from impact guns
,
pre order rfb 24
,
preorder kel tec